Warning Disclaimer; The following article is for educational purposes only, It is illegal to steal electricity from the grid and this crime carries a heavy prison sentence in any country. The grid can not be shut down so is always live, tampering with the grid supply will definately kill you and others. Please do not attempt any of the instructions in this article.
Run your Cannabis factory with no electricity cost at all!!!
Why do we pay for electricity?
The reason we do not get free electricity is because of our electricity meter, All the electricity that comes to our home from our supply goes through a meter, which is monitered by our electricity supply. We are billed in accordance with the meter readings. This image will help you visualize how it works;
How to get free electricity!
In the diagram above you can see that I have put an orange circle around the red and blue cables, this is where you need to tap the electricity from.
The black cable “service cable” is armoured so we can not tap it here and tapping the supply beyond the meter will not work because the meter will record your usage.
To get free electricity you will need two screw clamps such as these;
connect a thick cable (Meter Tails) to each of these by soldering or clamping then coat them with anti-conductive paint (make sure this paint is fully anti-conductive or you will die)
to the other end of these new meter tails connect a fuse unit/trip switches with RCD. ( This new fuse unit can be as large as your existing or much simaller depending on what you need to steal the electricity for;
eg. if you want to steal electricity for your whole house then the new fuse unit will be a mirror copy of the existing.
Whereas if you only want to run one appliance then your fuse unit can be small and only contain one trip switch.
Once your screw clamps are connected to the new meter tails and the meter tails are connected to the new fuse box you are almost ready to get all the free electricity you could need for growing marijuana or keeping yourself warm at night.
The following stages are not recommended as they will surely kill you!
Unscrew the bolt from your screw clamps and sharpen the end of it to a point.
ensure that your screw clamps and connections all have anti-conductive coatings on them.
Put on some thick rubber gloves and rubber boots, slip the screw clamps over the red and blue wires that I circled in the first diagram. Then tighten the sharpened bolt in order to pierce the cables sleeve and make the new connection.
Remember one clamp on the red wire and the other on the blue.
If you are still alive at this stage, which is most unlikely then you are going to prison for a long time…CONGRATULATIONS!!
This system can easily be undone leaving only slight damage to the original setup making it almost untracable.
Your new electricity stealing device could be unclamped from your supply at home, then put in the boot of your car and taken with you ready to steal electricity wherever you go.
Question; How much electricity does it use to grow marijuana?
Answer; who cares, it is now free!
Warning; we strongly recommend that you do not try this, I have never tried this and I know nothing about electricity. I am sure that this will not work and will only lead to your death.
